Circuit Technology Wire Dots Squares 10.0mm 210/pk

A12728

Circuit Technology - Wire Dots Squares consisting of a thin, flexible polymer film 1.0 mil (.025 mm) coated on one. 210/Pkg. Riparazione circuiti.

UM. CF
Disponibilità bassa
Disponibilità bassa
Generalmente disp. in 20 gg.
Qt.Min.Ord. 2

Contattaci:

98,00
IVA esclusa

ALLEGATI

Safety Data Sheet A12728
Safety Data Sheet A12736

SCHEDA TECNICA

Circuit Technology Wire Dots Squares 10.0mm 210/pk

Hold wires in place permanently!
Pre-cut shapes of thin, flexible polymer film membrane. Permanent, pressure-sensitive adhesive results in a strong bond. Available in round, square shapes and two sizes.

 

Material Properties:

Cover Film Clear Polyester Film 1.0 mil (.025 mm) Thick
Adhesive High performance Acrylic Adhesive 5.2 mils (0.13 mm) Thick (3M #3468MP)
Relative High Temperature Operating Ranges Short term (minutes/hours) 400°F (204°C)
Long term (days/weeks) 300°F (149°C)
Application Specifically designed for long term bonding to printed circuit boards and high surface energy plastics for the aerospace, medical and industrial equipment, automotive, appliance and electronic markets.
Shelf Life Minimum 12 months.

Physical and Thermal Properties:

Property Typical Value Unit Test Method
Peel Strength 72 hrs @ 22 C 84 0z./in. ASTM D3330 Modified
Static Shear Strength 72 F (22 C) / 1000g >10,000 min ASTM D3654
Tensile Strength (Yield) 72 F (22 C) >2600 psi ASTM D2370
Elongation 100 % ASTM D2370
Thermal Conductivity 0.17 w/m-k ASTM C518
Coefficient of Thermal Expansion 5.5 x 10 -4 m/m/C ASTM D696 25-175C

Electrical Properties:

Property Typical Value Unit Test Method
Dielectric Strength 1700 volts/mil ASTM D149
Dielectric Constant 25 C, 1 kHz 3.4 ------ ASTM D150
Dissipation Factor 25 C, 1 kHz 0.018 ------ ASTM D150
Surface Resistivity - Adhesive Layer >1 x 10 14 ohm/square ASTM D257
Surface Resistivity - Polymer Film Layer >1 x 10 16 ohm/square ASTM D257
Volume Resistivity - Adhesive Layer >1 x 10 15 ohm/cm ASTM D257
Volume Resistivity - Polymer Film Layer >1 x 10 18 ohm/cm ASTM D257
Insulation/Moisture Resistance - Adhesive Layer >1 x 10 11 ohm MIL-I-46058C (100 VDC 60 sec)
Insulation/Moisture Resistance - Polymer Film Layer >1 x 10 12 ohm MIL-I-46058C (100 VDC 60 sec)
Voltage Breakdown 3500 volts

------

 

 

PRODOTTI CORRELATI